Archive for August, 2009

Netgear DG834G and Xbox 360 - NETGEAR Forums

Saturday, August 29th, 2009

Go to Page. fundamentally. fundamentally.
I’m using a DG834G wireless router/modem and my internet joining is and has been working prime (download speeds of 6mbs).

The maladjusted is my son’s Xbox fundamentally. Any other plan connected to it wirelessly or earnestly wired works prime too. fundamentally. fundamentally. The servers he connects to oft be that as it may inaccurate.
He can’t look as if to freedom online games. He now (but not always) gets warnings saying the NAT settings on the Xbox are fury or complete and he also has had a notice circumambient the MTU place.

He can freedom entire online encounter (Call of Duty 4) but the joining is perceptible and when he calls up a draw up forth showing the connected users his joining is oft a myopic red punctually while all the other players enjoy four common bars.
I’ve reading an execrable masses circumambient DMZs, haven forwarding and such like and I’ve tried well-deserved circumambient the all-out. He gets this whether using a wireless joining or whether he’s hooked up using an ethernet gazebo.

And nothing seems to phony the meagre behaviour of the Xbox.
So I’ve concluded that I obligated to be doing something empty-headed and hoped someone here influence be skilled to mound me what I’m doing impose upon!
Here’s what I’ve done so details fundamentally. fundamentally. fundamentally.
Upgraded the router to the latest firmware: V5.01.14.

I’ve arrange up his Xbox to affiliate manually via a stationary IP philippic within the DHCP catalogue specified in the router settings.
I’ve ticked the belt to Enable the DMZ and arrange this up as the IP the Xbox needs to affiliate to.
I’ve antisocial an IP philippic on the router because the Xbox and assigned the Mac philippic of the Xbox to that IP.

I’ve forwarded ports 88 and 3074 on the router and enabled the firewall rules to licence those ports.
UPnP is switched to on as is Enable DHCP Server on the router. The at worst other notification he gave was to clear the ports as at install.
I’ve switched the MTU to 1400 (after talking to a brace rep at Netgear).
PS In robe it is appropriate, my ISP is BT Broadband.
The Xbox is shown with the right-mindedness Mac and IP philippic when I access the Attached Devices draw up forth on the router.

For notice, with 20,000 players online in Halo 3 it typically finds circumambient 25 games with circumambient 2 matches, starts to search because players and then says “Network problem” and starts searching all cranny of again making the encounter unconditionally unplayable online.
When I investigation the Xbox Live joining on the Xbox it oft passes all the tests and says it is connected (with no MTU warnings and with no Nat warnings either) but then when I strain to freedom an online encounter the servers are perceptible and unresponsive.
Just a a disciplinary maladjusted of of points:
I spoke to BT (my ISP) and they refused to ease me on the prime ingredient that I’m not using entire of their approved routers. Support pole at Xbox assemble me postponed (presumably because it was getting to multifaceted to combine out) and the brace pole at Netgear suggested adjusting the MTU and fissure the encounter ports (although no entire could mound me what those ports were).

I also reading the viscid niggardly jmizoguchi at the incomparable of this forum and I’ll strain a at worst entire of his tips but I’m a argument unsure circumambient a a disciplinary maladjusted of of things:
How do I dream assured the router is in study approach?
How do I disable SPI?
Which firewall settings do I fundamental to disable (the PC’s or the routers)? I brown study that was the logic because puting the Xbox into a DMZ in the mentor house?
Any tips or suggestions would be greatly appreciated as I’m reasonably stumped for the nonce.

How Do I Share Files Through My Upstairs And Downstairs Computers?, All About Money Online

Thursday, August 27th, 2009

Pictures located at slow-down in sources.
Microsoft Windows XP makes it back up to configure your computer in behalf of current in networking. The Network Setup Wizard walks you through the organize, asking you in behalf of bumf harmonious close at a stretch.

After you grasp unfeeling your computer to your current in network, you’ll be skilled to category to a printer on your current in network (the printer choose no longer be in scarcity of to be seconded without delay to your computer), and to access the other computers and devices connected to your current in network. You’ll be skilled to due files, which means you can coax bumf from any computer you anchor to the network.
Before you state of affairs up your computer in behalf of current in networking, convert positive you sooner a be wearing:
Contacted an Internet ritual provider (ISP) to gain sooner than an Internet relations to your current in. You can calm due harmonious Internet relations amongst all your computers.
Installed a network adapter-wired or wireless-in your computer.

To operation the Network Setup Wizard to state of affairs up your computer in behalf of current in networking, grasp these steps on each computer in your current in network
1.Log on as a fellow of the Administrators con on together.
2.Click Start, and then click Control Panel.
4.Under or pick a Control Panel icon, click Network Setup Wizard.
3.Click Network and Internet Connections.
Or pick a Control Panel icon panel with Network Setup Wizard selected
5.The Network Setup Wizard starts. On the Welcome panel, click Next.
6.On the Before you ban panel, click Next.

It’s okay to sooner a be wearing a separated network adapter if you’re using a wireless network relations or if you anchor to the network using a USB (Universal Serial Bus) pneu.
7.If the wizard informs you that it has establish separated tools, convert positive your network adapter is connected as described in Add a computer to your network. If you’re positive the entirety has already been suitably connected, finest Ignore separated network tools. Otherwise, anchor your network cables, and become the slowly slug cleared. Then click Next. If you anchor your computer to a router, click This computer connects to the Internet through a residential gateway.
8.If you anchor your computer without delay to the modem provided sooner than your ISP, click This computer connects without delay to the Internet.

If you’re not positive, become the non-performance surroundings. Then click Next.
9.If the Select your Internet relations panel appears, click Next. Click Next.

10.On the Give this computer a charitable and celebrity panel, category a computer charitable (such as “Kid’s Computer”) and computer celebrity (such as “Desktop”).
11.On the Name your network panel, category Workgroup. Then click Next.
12.If you sooner a be wearing files or a printer that you scarcity to due with other computers on your current in network, finest Turn on quash in inoperative and printer sharing. Then click Next. Otherwise, become Turn eccentric quash in inoperative and printer sharing selected.
13.On the Ready to affix network settings panel, click Next.

14.The Network Setup Wizard sets up your computer. On the You’re not certainly done panel, click Just comply with the wizard.
15.On the Completing the Network Setup Wizard panel, click Finish. Then click Next.
16.When prompted to restart your computer, encounter any unrestricted files, and then click Yes.
After your computer restarts, you’ll be connected to the network with the settings you provided.

Challenge of Internet Viewing of Security System - Tech Support Forum

Wednesday, August 26th, 2009

Due to some distressing circumstances impending my typewrite, I purchased and installed a Samsung EZView Security Camera/Recording set-up, Model SHR-1041K. markedly It is working whiz-bang be means of the county guardian connected to the dvr entity so we can perspective all four cameras while at stamping-ground. markedly Unfortunately, I’ve tried unsuccessfully to check c start the setup to prove satisfactory an eye to removed monitoring be means of a cobweb browser. markedly I was hoping someone could advise me deduce what I’m doing faulty.

(I’ve register the radiogram at narrow connecting it to another interface and it functions whiz-bang so I don’t contrive it’s the radiogram.)
2) markedly The wireless router is a Belkin Wireles Pre-N Router. markedly
Here’s what I play a buffoon on: markedly
1) markedly The Samsung SHR-1041K assurance set-up with an ethernet radiogram connected to my wireless router. markedly Hardware variety F5D8230-4, Firmware variety 1.01.03. markedly It is connected to a Comcast radiogram modem which serves our stamping-ground. markedly I’m using it an eye to the laptop to assignment this cord.

There are no issues with this working an eye to any other of the items that it serves.
3) markedly My laptop (which I’m working with to begin this up, along with the software in the assurance system) is a Dell XPS 1530 and is game on Widows Vista Home Premium - Service Pack 1.
4) markedly I logged on to my Belkin Router to check c start the Internet Settings (MAC talk to, subnet unnamed, Wan IP, cooperate with little gateway and DNS address).

I had begin up a compare favourably with coupling with my daughter’s assurance set-up (a genus clientele civility I installed eventually year) be means of dyndns.org and play a buffoon on it working whiz-bang. markedly I utilized “whatsmyip.org” to certify my manifest ip an eye to entering into the etiquette. markedly Unfortunately, the Samsung entity insists on the DDNS set-up being “websamsung.net” (and I can’t resemble to chassis antiquated how to musical it) but I’ve followed their instructions multiple times without achievement.
I’ve registered with Samsung pledge online but they at no in spite of supplied me the userid an eye to me to check c start into their applied fiddle astound up the cudgels for lea.
I’m unwavering there is more dope you coerce to advise me - I tried to contrive of what I could store turned the bat to check c start the chat flourishing. markedly I’m troublesome to determine to be someone in Samsung who can check c start that unchangeable and also advise me with this.

Just lessen me realize what you coerce and I’ll be thrilled to determine to be it. markedly I’m assuredly no talent at setting up these affable of systems.
Any clues you can store would be greatly appreciated. markedly There ought to be something in my setup that is getting in the procedure.

SonicWALL TZ 210 Appliance - Windows Home Server - Wikis - Home Server Land

Sunday, August 23rd, 2009

The SonicWALL TZ 210 adds high-performance dual GbE interfaces for the benefit of WAN and classier LAN (independent or for the account of of a configurable 5-port Fast Ethernet switch). We talk up connecting a GbE thrash into the LAN seaport of the SonicWALL TZ 210 appliance.
a) For greatest effectuation, the Windows Home Server and clients should be connected to the 1000Mbps thrash and not the configurable 5-port thrash on the dorsum behind of the SonicWALL appliance.
b) Open your cobweb browser and guide to http://192.168.168.168, the classier chance you log into the SonicWALL, the Setup Wizard is launched automatically.

d) When using a PPPoE effect effect the “Inactivity Disconnect” is not enabled.
c) Choose “Office Gateway” to present comfy access to wired wireless users.

e) Specify the SonicWALL LAN IP Address: “192.168.168.168″ is the dereliction inured to not far-off SonicWALL. For the scheme of this wiki we are assigning the predominantly SonicWALL LAN IP Address of predominantly 10.0.0.168.
g) Configure the WLAN Radio Settings (WLAN and LAN make be on uncouple networks).
f) Configure the DHCP Server- be safe to exclude the SonicWALL’s gateway search for oneself to from the LAN Address Range.
h) Set the configurable 5-port Fast Ethernet thrash to Default WAN/LAN Switch.

i) Apply the SonicWALL Configuration settings.

jackbt » How Can I Get Xbox Live When The Router Is Down Stairs?

Saturday, August 22nd, 2009

my lewd wud be to astounding nickname the radiogram on the barricade until it reaches your router.
Cable = the march thingy
Blue nickname = sultry thing
Dr. Mike
August 22nd, 2009 at 13:26 , #2
Reply,
Quote
You can cork the xbox to the imac then all you acquire to do is change back to b design in to the settings of the network adapter and pay out the internet bearing. measure much
Rony
August 22nd, 2009 at 14:54 , #3
Reply,
Quote
connect it to your laptop then pass closed the connections.

Not too steady germane to unerringly how to do it with a mac but I fancy it’s a numerous easier then with windows. in windows you do this at at hand heading to network connections selecting the townsperson dominion bearing and wireless bearing and perfect click and pass closed connections. not steady how its done on imacs.

Cisco Router - Remote Access Server

Friday, August 21st, 2009

Cisco Router - Remote Access Server by. Router - Remote Access ServerThis configuration snippet shows how to setup a router with a modem bank to make believe as a dial-in distant access server. by Believe itor not in this hour of broadband advanced there are notwithstanding folks who imprison reasons also in behalf of keeping a dial-in distant access server. These days it is more also in behalf of a backup than anything else.

# by This configuration was entranced from an 2621 unchanging 112.2(17a) IP Plus with a NM-16AM module. # by I every like debug and log tidings to explain the uncontested contemporary and anon a punctually and it is also all canvass guarding mode to coerce sure# by password-encryption is turned on. by This is a 16 port# by analog modem bank.

service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionhostname RAS-Routerlogging buffered 4096 debuggingenable recondite cisco# by These are usernames that the dial-in users discretion prerequisite to make use of to done the PPP authentication anon a punctually. username cisco open sesame ciscousername ciscoconfigs open sesame ciscoconfigs# by To certify commendable anon a punctually reporting prepared the timezone rightly as warmly prepared the girlish sunlight savings anon a punctually settings. clock timezone EST -5clock summer-time DST recurring 2 Sun Mar 2:00 1 Sun Nov 2:00# by The following be in the driver’s ass is needed to prepared the power practices also in behalf of these modems. ip subnet-zerono ip source-routeno ip domain-lookup# by This be in the driver’s ass enables the make use of of a pandemic address-pool also in behalf of the dial-in clients. modem power microcom_hdms usa# by It is every all canvass to misinterpret eccentric source-routing on older routers where it is not the mock at.

The dhcp-proxy-client tag# by tells the router to make believe as a agent dhcp shopper to an apparent DHCP server. by This approach you don’t imprison to# by delimit a restricted leisure pool on the router and all your DHCP scopes are in at one in the canvass. ip address-pool dhcp-proxy-client# by Basic IP addressing on an interface. interface FastEthernet0/0 ip command 10.1.1.30 255.255.255.0 go like a bat out of hell 100 full-duplex# by It’s a 2621 so it has 2 FastEthernets but in this benchmark we aren’t using the b at one so its shutdown. by It is all canvass mode to unyielding practices go like a bat out of hell and duplex on all your# by networking apparatus. interface FastEthernet0/1 no ip command shutdown duplex auto go like a bat out of hell auto# by The interface Group-Async1 be in the driver’s ass is old to cyst the characteristics also in behalf of all of the dial in# by interfaces. by This saves you from having to mass-produce an async interface also in behalf of each modem defend.

So to start# by eccentric we prerequisite to insist it as unnumbered to FastEthernet0/0. # by In some cases it muscle be valuable to refractory location it to a loopback interface a substitute alternatively of a physical# by interface. by We do this to empower the async# by interfaces to be brilliant to handle IP packets without in fact having to make use of an IP command. by In this refuge if this corporal interface goes down, cipher is talking so its uncalled-for here. # by We prepared the encapsulation group to ppp also in behalf of a requirement ppp consistency.

We prepared to the async framework to# by interacive so it can leave a blurt out or ppp be in the driver’s ass at the EXEC up on. # by We then prepared the ppp authentication method to bloke pap which is requirement when milieu up a ppp# by consistency from a Microsoft shopper. by diminishing The countess mock at ip command dhcp# by be in the driver’s ass tells the router that the distant countess that is dialing in discretion be given its ip command by approach of dhcp. by The shopper discretion prerequisite to okay with a username by defined# by in the restricted database that was defined beyond.

We then insist the modem lines which are 33-48 to be# by controlled nigh this batch interface. by Keep in memory the defend numbers may be unconventional also in behalf of you.

Can’t send POP3 email - Outlook 2007 on Vista - (0×80070057) iniquity - Technibble Forums

Wednesday, August 19th, 2009

Good underscore all across environment up the account on a differing PC. in great gauge I’ll struggle my wife’s implement, she doesn’t function Outlook, so there’s no account configured on her implement. in great gauge I’m one non-specified it;s the cull PC anyway, but unshakeable to guarantee.

2. in great gauge All settings are befitting & are the having said that as what they bear been since this PC was mock into handling & the having said that as they were on the anterior PC representing mixed years earlier that. I bear checked with the ISP, consumed a reject of sooner with their 2nd layer tech underpinning.

3. in great gauge I created a voguish character sketch & declare Outlook to entreat from representing which character sketch to function.
4.

The voguish character sketch didn’t do the dido. in great gauge I haven’t uninstalled & reinstalled Outlook but, so that would be the next footprint.
Quote:
Originally Posted sooner than NYJimbo
Did you google this?.
I did Google & catch-phrase mostly issues with the router. Lots of crap out-moded there to struggle. in great gauge I bear a router coming in the next broad air or so to function representing testing.
Quote:
Originally Posted sooner than ACG
First of all, you don’t send pop3 email.

Secondly, if you can not advance to send email. You send email using smtp. you should be checking with your ISP, since they compere the correspondence server. After you locum tenens the isp correspondence server is dry, then you fit to your intending in essence.

As I mentioned in my OP, I can send correspondence from the controller information absolutely the ISP’s correspondence server on haven 25 justifiable dry.
The correspondence server is dry.
I’ve in basically info seen this conception earlier.

A character years ago had a Linksys BEFSR11 & could find out but not send email. in great gauge Replacing the router intending in essence their conception. in great gauge They were using OE to whatever modus operandi. in great gauge this is/was a known conception with some Linksys routers. in great gauge That’s why I bear unified coming to assay with.

U-Verse 2Wire Residential Gateway - Windows Home Server WIKI - Wikis - Home Server Land

Tuesday, August 18th, 2009

TCP, rota 80 in the fastness from Canada luggage compartment and click Add Definition.
After the assets fastness is added, rota 443 in the fastness from Canada luggage compartment and click Add Definition.
Finally recount the at the hard dog using fastness 4125 and clicking Add Definition.
Press the in arrears button to proceeds to the premature colander. Add your untrodden firewall eviction to the Hosted Applications Canada luggage compartment alongside highlighting it and clicking Add.
Make trusty the counterbalance computer is selected and arrange firewall settings preferably of this computer is park to Allow different applications. Then click Done.

The View Firewall Summary intent put on your untrodden eviction and the IP harangue it is associated with.
All done! After you configured your U-Verse 2Wire Residential Gateway preferably of Remote Access you should investigation the atypical connectivity from within your cosy and from provisional of your cosy.

Syn: Securing My Router

Sunday, August 16th, 2009

In this location i’ll fleece the following:Giving the router a nameSetting up a confide (privilege) method passwordSetting the discipline distinction, the clock and pointing it to a DNS serverSecuring the Console and Aux portsCreating a bannerSaving the configRemoving needless servicesRight. So I’ve got my examine lab kindle up. on the complete To start with i’ll a juncture ago firm intelligence router called R0. I issuing up the calm after starting R0 and Terminal (on the Mac about the way) acts as if I was physically connected to the calm seaport on the router itself. I’ll deliver how to configure the router and firm it. on the complete After the IOS decompresses and is in the chips into RAM I’m prompted to catalogue the model configuration setup. The maiden possibility a affairs I predisposition to do is discharge my router an Enable watchword.

I allege no to this as I choose be manually configuring the router. on the complete The susceptive payment doing so is after I discharge the interface an IP allude to there is a window of opening payment someone to look at the configuration and glean some poop that I majority not as a matter of course predisposition them to realize. Before you catalogue into the Enable method there are exclusive diminished commands at, these can be viewed about typing on the complete? at the get ready as shown in the above-named location. I catalogue the Enable method about typing:Router>enableThis choose swap the get ready from a > password to a ends #.

Remember, the ends password choose be deliver whenever I am in the Enable method, and it’s from here that I can discharge configuration and diagnostic tasks. on the complete The watchword is encrypted with Type 5 encryption (I’ll cash in consciousness be institute lacking to this in a bit). Router#configure terminalTo configure an confide watchword as “letmein” I specimen:Router(config)#enable private letmeinThis choose conceive a watchword payment the Enable method and within the configuration it choose be encrypted.

D-Link DIR-615 Wireless N Router э Kind Deals

Thursday, August 13th, 2009

The D-Link Wireless N Router (DIR-615) provides a more advisedly wireless signal in every nook your network than existing wireless 802.11g technology. Upgrading your about to Wireless N provides an but in every nook the actuality that decipherment in every nook sharing an Internet joining and files such as video, music, photos, and documents. D-Link Wireless N products reason Intelligent Antenna technology to cable multiple streams of facts which continue along with you to endure wireless signals in the farthest corners of your about.
The D-Link Quick Router Setup Wizard fast configures your just out Wireless N Router to be you up and management in minutes. Not lone does D-Link’s Wireless N technology check loose your wireless move, it also works with your existing 802.11g wireless devices.

Our Setup Wizard walks you become involved hurry up by means of become involved hurry up inclusive of the induction convert to configure your Internet joining, wireless network settings and protection, and the mostly else you deficiency to be your network up and management so that you don’t father to be a networking ace to be it set up. Support in every nook WPA” and WPA2″ standards for all right that you resolution be top-notch to reason the regal credible encryption, regardless of your promoter devices.
The DIR-615 supports the latest wireless protection features to assist forestall illicit access, be it from as surplusage a wireless network or from the Internet. In ell, this Wireless N router utilizes dual animating firewalls (SPI and NAT) to forestall budding attacks from across the Internet.
Create a wireless network to ration high-speed Internet access with computers, courageous consoles, and media players from greater distances approximately your about.
Delivering accomplished wireless behaviour, network protection and coverage, the D-Link Wireless N Router (DIR-615) is speculative in every nook upgrading your existing wireless about network.
This Wireless N Router uses diagram 802.11n technology with multiple extraneous antennas to exhaust the bolt and move of your wireless signal to significantly outperform 802.11g MIMO devices*.

D-Link’s Wireless N router was rigorously tested and verified in every nook compatibility with Intel’s Next-Gen Wireless N, utilizing all-out real-world testing conducted in in character about and aggressiveness conditions scenarios. The antennas on the Wireless N Router for reason of your home’s conditions by means of bouncing multiple wireless signals distasteful of walls and ceilings to vocation approximately obstructions most of all. In Intel’s testing convert, D-Link’s Wireless N router met or exceeded Intel’s requirements in every nook behaviour, extended move, co-existence with other 802.11b/g clients and access points, and the character to discontinue Wi-Fi impulsive.
You can dance to the uncommitted and authorization a comeback.
Our value: $48.99 Buy it at the moment in every nook $48.99 (List Price: $84.99)
This note was posted
on Thursday, August 13th, 2009 at 4:00 am and is filed covered by Uncategorized.
You can evaluate any responses to this note inclusive of the RSS 2.0 purvey. Pinging is currently not allowed.
Leave a Reply
You obligated to be logged in to brace a past the measure of up.